Ramco  Model DW-37A   37” wide Single Top Head Widebelt Sander

Sanding width 37”

Motor Size 20 HP

Dual Action Drum with Adjustable Platen

Variable Speed conveyor drive

Voltage 230    3  phase

Serial Number 319A

Year: 1998

Quickwood Denibbing sander, Used, in good condition. Model: Pro 1400, Working width is 55"  and a work piece thickness capacity of 4". Feed Conveyor Speed range is 6 - 46 Feet per minute with a 3.5 HP feed motor. Conveyor Vacumm motor is 12 HP.  Machine has 8 Spindles that are 21" in length with 12" diameter abrasive strip wheels that have a variable speed range of 300 to 1200 RPM.  The Carousel that carries the Spindles also  has variable speed of 3 - 16 RPM.   Main motor (carousel) is 6.5 HP with 2.5 HP motor for spindle rotation.  Machine is wired for 480 Volt / 60cycle / 3 Phase. Machine has been taken out of service and is in good running condition. Machine does not require Riggers, and customer is expected to load the machine, FOB Middelbury IN.   

IMA Hot Melt Glue Edgebander, Designed to allow operation by feeding parts past the glue head using the table and ball rollers, or the part can be vacuum mounted to the table (Vac Pump and Vac Pods included) with the head guided manually around the part with the weight of the applicator head counter-balanced from the boom. Specifications: Board Thickness 16mm to 45mm(0.630" - 1.77"),  Strip Height 20mm-50mm (0.78"-1.97"),  Strip Thickness 0.4mm to 3mm (0.016" - 0.118"),  Glue Tank 0.8Liter (48 Cubic Inches, or 0.8 quart ), Processing Temperature 140 to 220 C Degrees ( 284F-428F).  Current running 8 Amps, Glue Pot 1400 Watts, Max Overall Watts 2600. Weight of Movable head 20kg ( Note: this 45 lbs head weight is counter-balanced with spring.)   Working height 960mm (37 3/4"),   Unit includes operators manual.   

Denray Sanding Table

48" X 72"

440 Volt, 60 Cycle, 3 Phase,

Model 7200B

includes two Extra Filters, In Very Good Condition,

Baker D Series Band Resaw. Capacity 16" x 16", Band Saw Blades 1 1/4" or 1 1/2"

- 40 HP Motor

- 10 HP Hydraulic Feed System

- 8 ' Extended Outfeed Conveyor and Frame Length. Note: Outfeed Conveyor is Removable

System sold new in 2011. Has had only one user and can be seen in operation.

Omga 521 ST Saw.

Maximum Cutting width 12 5/8"

Maximum Cutting depth 5 1/2"

7 HP Motor

Complete with;  9' Infeed Table and Omga Model FP 2000 Numerically Controlled Positioning Stop.

6.5' Cuting capacity.

All of this was purchased new in 2015.

Pistorius MN 201 Double Miter CutOff Saw

Miter Cutting Capacity 3 15/16" wide x 2 5/8" high

Toe Notch Cutting Capacity 4 1/4" x 4 1/4"

(2) 1 1/2hp motors

Equipped with Optional toe-cut-out fixture

Timesavers Model 137 HD 60 36" Wide Single Top Head Widebelt Sander.

20 HP Motor

Infeed Conveyor Extension

Load Meters

Belt Size 37" x 60"

Combination Drum/Platen Sanding Head

Diehl Model 75 Straight Line Rip Saw. 15HP Belt Driven Motor, 2" dia. arbor, 18" blade capacity, 4" max depth of cut,12" min part length, 21 1/2" width of table to the right of blade & 37" to the left. Variable Feed Speed. Auto Lubrication.

Machine was rebuilt by Diehl in 2000. A new chain, race and cams were put on. Machine was converted to Belt Drive with a variable feed speed. Customer ran it for 5 years and then decided to go to a gang saw. The machine has been in storage since 2005. Machine can be seen in operation.

Quick 12" Wide Glue Applicator. 6' Infeed, 6' Outfeed. Equipped with Holdown Roll, Doctor Blade and Cover for Glue Roll.